Cement Canvas is a new product with revolutionary materials called Geosynthetic Cementitious Composite Mats used as an
alternative to conventional concrete. It is a flexible, concrete filled geotextile that hardens on hydration to form a thin,
durable, waterproof and low-carbon concrete layer.Essentially, it’s concrete on a roll.
Welcome to TradeChina
Os produtos mais vendidos for concreto feito sob encomenda reduzem o custo do trabalho
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meo Food Co., Ltd.
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
0-30%
Nearest Port
Penang, Valparaiso,Jetta
Accepted Delivery Terms
Employees
501-1000 people
Accepted Payment Currency
USD,EUR
Average Lead Time
5 Day(s)
Certifications
Product Specifications
--Product Description
Title goes here.
NUOLIAN Engineering Material Co.,Ltd CHINA
Professional Cement Canvas Manufacturer
American Society for Testing and Materials Standard
--- PRODUCT DESCRIPTION ---
Product Description
Cement Canvas
---Product Specification---
---Technical Testing Data--
(ASTM STANDARD)
---Product Applications--
---Product View--
---Cement Canvas Installation Guide--
1, preparation work: First, we must plan and measure to ensure a certain slope so that the water flow can flow smoothly from the upper end to the lower end. Secondly, after the construction site is cleaned and leveled, the construction line is set according to the design drawing, and the drainage slope is re-measured.2, excavation: Set the construction line according to the design requirements, the sides of the ditch need to be leveled, and the slope inside the ditch must not have any virtual soil and empty holes. It is necessary to treat the water damage parts in a tamping manner, except for debris and gravel in the slope. If necessary, use ash soil for compaction treatment, or grouting and reinforced to seal, and the treated parts are required to have good stability.
3, laying The material can be laid vertically and horizontally. Be sure to level the substrate, otherwise, it will affect the appearance quality!
4, seam processing:
4.1. The lateral width of the adjacent two cement blankets is 10cm wide and the depth is doubled.
Place the cement blanket joint at the stack and flatten it.
4.2. Press the cement blanket above the cement blanket in the direction of the water flow, and the superimposed area shall not be less than
4.3 Evenly apply sealant at the seam.
4.4 Fix two pieces of cement blanket with 5*38mm stainless steel screws
4.5 groove along with the treatment
Fix the edge of the material on the edge of the groove with rivets, and fix it with rivets, fix it and use it. The soil covers the edge
4.6 watering solidification
Before the watering, it is necessary to inspect and check the whole of the laying. After passing the water, it can be watered! It needs to be watered 9kg (thickness is calculated in 10m) to be poured, and it must be poured less, evenly from the edge to the middle. Sprinkle water, preferably by spraying, the flow rate is 4000ml/min until the color of the cement blanket becomes darker. Do not use a water column with a high pressure! Do not step on the water after pouring water. When the temperature is ≤ 5 °C, take insulation measures. When the average temperature of day and night is higher than 30 °C, the surface should be covered with plastic film or geotextile, etc. Keep wet, watering and curing time should not be less than 3 days
connected to numerous ports and has convenient transportation and advanced communications. The company has 86 middle and high-level professional and technical personnel. With Karl Mayer's high-speed "Raschel" warp knitting machine, Marimo multi-axial looms, Dorialooms, and two bi-directional grid production lines, two unidirectional grid production lines and master Menzel's coating technology.
4.2. Press the cement blanket above the cement blanket in the direction of the water flow, and the superimposed area shall not be less than
4.3 Evenly apply sealant at the seam.
4.4 Fix two pieces of cement blanket with 5*38mm stainless steel screws
4.5 groove along with the treatment
Fix the edge of the material on the edge of the groove with rivets, and fix it with rivets, fix it and use it. The soil covers the edge
4.6 watering solidification
Before the watering, it is necessary to inspect and check the whole of the laying. After passing the water, it can be watered! It needs to be watered 9kg (thickness is calculated in 10m) to be poured, and it must be poured less, evenly from the edge to the middle. Sprinkle water, preferably by spraying, the flow rate is 4000ml/min until the color of the cement blanket becomes darker. Do not use a water column with a high pressure! Do not step on the water after pouring water. When the temperature is ≤ 5 °C, take insulation measures. When the average temperature of day and night is higher than 30 °C, the surface should be covered with plastic film or geotextile, etc. Keep wet, watering and curing time should not be less than 3 days
--- ABOUT NUOLIAN ---
Taian Nuolian Engineering Materials Co., Ltd, located in Shandong Province, a large coastal province in eastern China, It isconnected to numerous ports and has convenient transportation and advanced communications. The company has 86 middle and high-level professional and technical personnel. With Karl Mayer's high-speed "Raschel" warp knitting machine, Marimo multi-axial looms, Dorialooms, and two bi-directional grid production lines, two unidirectional grid production lines and master Menzel's coating technology.
--- FAQ ---
Q:Are you trading company or factory?
A:We are factory for some main product, for other product we are trading company.
Q: How long is the delivery time?
A:Generally it is 2-3 days if the goods are in stock. Or 10-15if not in stock, according to the quantity.
Q:Do you provide samples?
A:Yes,samples are free.
Q:What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment.
Q:Are you trading company or factory?
A:We are factory for some main product, for other product we are trading company.
Q: How long is the delivery time?
A:Generally it is 2-3 days if the goods are in stock. Or 10-15if not in stock, according to the quantity.
Q:Do you provide samples?
A:Yes,samples are free.
Q:What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment.
--- Fast Response Click For Inquiry and Details ---
[Live Chat]
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier
Popular Searches
limoncellogeo cell webestelle0 celllyocell topshalf cellstree bellsgeocell 2300swagelok cellswine cellarsdollsdeucesexpelispockel cellsvermicellili cellneatcellmegelliaeolusfleece millsswagelok cellsplat cellsnacelleowellcellotree bells50 bellsdeer callspens cello0 cellgeocell 2300lorellilimoncelloeclosacell