This fiber laser cutting machine is specially developed for steel plate cutting. The working size can be customized according to requirements. The CNC fiber cutting machine has the characteristics of simple operation, compact structure and low cost. It is widely used in automobiles, shipbuilding, construction machinery, agricultural machinery, and is suitable for carbon steel and stainless steel. Gantry CNC cutting machine for metal fiber laser cutting machine for sheet and tube cutting.
|Equipment model||LP-T1-2000W -4015|
|Laser type||fiber-optic laser|
|Laser working medium||YVO4|
|Laser wavelength||1070 nm|
|Rated output power||2000 W|
|Effective cutting range||1500×4000mm|
|Worktable axial positioning accuracy||≤±0.03mm/m|
|Workbench repeat positioning accuracy||≤±0.03mm/m|
|Maximum positioning speed||12 m/min|
|Workbench maximum load||1500KG|
|Power supply rated voltage||380V|
|Total power protection level||IP 54|
1. Precise beam quality with small divergence angle
Unparalleled product life
With single-core junction semiconductor pump lasers as the pump source for fiber lasers, all-fiber lasers will have long life characteristics. Therefore, the minimum service life of Wuhan Ruike fiber lasers has exceeded 100,000 hours.
Low power consumption, product maintenance free
2. Fiber-optic dedicated laser cutting head and automatic tracking system
The original imported fiber-optic laser cutting head and capacitor non-contact automatic tracking system can automatically adjust the optimal focal length to ensure the best cutting effect of the whole board, and avoid material scrapping caused by the problem of focal length variation when the material is not flat.
Since the cutting head is equipped with a non-contact sensing device, under the control of the system, a stable Z-axis floating function can be realized, which directly eliminates the influence of the unevenness of the plate on the cutting quality, so that the numerical control laser cutting machine has a high cutting yield.
3. Machine tool system
The mobile gantry structure can maintain good stability and shock resistance for a long time; the whole beam is professionally manufactured by professional large-scale enterprises, secondary aging treatment, and precision machining of large-scale gantry milling machine to ensure the rigidity and stability of the machine tool and good dynamic performance. . The equipment has high precision, good rigidity and stable operation.
Machine base: professionally manufactured by professional large enterprises, secondary aging treatment, and large-scale gantry milling machine precision processing, these design and processing methods ensure that the machine tool has excellent shock resistance, high rigidity and stability.
Slag removal system:The lower part of the machine is equipped with a zone collector that automatically removes waste from the production process and collects small parts.
Dust removal system:The workbench is connected by industrial dust collector, which is flexible and convenient. It is dust-collected on site, treated on the spot, and adopts high-power turbine fan. The suction is strong, which can effectively ensure the cleanliness of the air and ensure the clean and tidy production environment. The sound-absorbing material is attached inside, and the noise reduction effect is obvious, so there is no need to worry about noise interference.
4. Transmission system:
It adopts imported gear rack and pinion drive and is guided by double-sided linear guide rails. It also adopts the imported servo motor drive system and adopts Shanghai Jiaotong University to develop CNC system. Its control has stronger stability and better compatibility to ensure Machine accuracy in high-speed motion.
5. Red light indicates:
The fiber laser cutting machine is equipped with a red light collimator that helps the operator to calibrate the laser cutting head anywhere on the board.
6. cooling system:
The fiber laser is equipped with a water cooling system. The temperature of the refrigeration unit is shown by a digital meter. When the water temperature exceeds the specified temperature, the refrigeration unit will automatically cool. When the water temperature is lower than the specified temperature, the refrigeration unit will automatically stop cooling and have an electric heating function.
The waterway system of the fiber laser cutting machine mainly consists of two parts: one part is the cooling water coming out of the chiller, and then entering the laser in two ways, one part enters the main part of the laser, and cools it; one way enters the part of the laser electric control box, and carries on it Cool down; return to the chiller after cycling.
1000.0 Piece per year
|Lead time :||25 Day|
|Packaging details:||Packaging Packaging Details The normal package is wooden box(Size: L*W*H). If export to European countries,the wooden box will be fumigated.If container is too tight,we will use PE film for packing or pack it according to customers special request.|
You May Like:
Congratulations, you have successfully submitted the inquiry form.
Your inquiry has been recorded:
Now you can