Description
Winner control ball valve consists of WAV4-… series rotary actuator and WCBS… series ball valve. Equal percentage flow characteristic guarantees the valve performances of stability. Control ball valves are widely used in HVAC system, heating system, water treatment equipment, and water running control in industrial automation, such as: AHU, flesh air-handling unit, differential pressure control unit and heat exchanger for flow regulation and on/off control.
Application
HVAC system
Heating system
Water treatment system
Industrial equipments
Operational mode
Winner control ball valve is motor-operated by a type of WVA4-1…, WAV4-2…, and WAV4-3… actuator. The actuator is controlled by a modulating on/off , 3-point or proportional control system and move the ball of the valve, to the opening position dictated by the control signal.
Valve body:
Medium: cold/hot water, with 50% glycol Temperature of medium: 2°C...90°C
Rated pressure: PN20 Pipe connector: internal thread
Ambient temp. range: −5…+60°C;0…90%RH Size: G1/2’’ -G2’’
Valve type: 2-way and 3-way Flow characteristic: equal percentage, on/off
Material
Valve body: forged brass, Hpb59-1 Seal: ball: EPDM+PTFE
Ball: stainless steel brass stem: EPDM
Valve connector: PC Valve spindle: aluminum alloy
Model No. |
DN(mm) |
Inch |
Kvs(m3/h) |
Pvmax (MPa) |
Ps (KPa) |
WCBS315 |
DN15 |
1/2” |
6.3 |
2.5Mpa |
1400 |
WCBS320 |
DN20 |
3/4’’ |
6.3 |
2.5Mpa |
1400 |
WCBS325 |
DN25 |
1” |
10 |
2.5Mpa |
1400 |
Actuator
WVA4-3… 24VAC/DC±15%, proportional (0-10VDC/0-20mA, 2-10VDC/4-20mA)
Output torque: 3 type, 4N.m, 6N.m and 10N.m Angle of rotation: 90°
Manual handle Automatic overload protection system
Manual selection of ball rotation direction: C.W. /C.C.W, factory setting is C.W.
Protect rank: IP54 Operation time: 50S-90S
Function (proportional type)
The actuator is controlled by a modulating proportional control signal, using high transmitting ratio gear drive to fix and lock.
WVA4-3… 24VAC/DC±15%, proportional (0-10VDC/0-20mA, 2-10VDC/4-20mA)
Black wire and brown wire are the power wire.
Yellow wire accept 0-10V control signal to control the valve’s open angle.
Model No. |
Working Voltage |
Actuator type |
Output torque |
Consumption |
Valve body |
WVA4-304 |
24VAC/DC±15% |
3-point |
0-10V |
6VA |
DN25,DN20,DN15 |
![]() |
||